SCANTEAM®
8310 MICR Check Reader
Description- The SCANTEAM 8300 product line is a
family of check reader products with various interface
and decoding capabilities. All versions utilize a
magnetic MICR read head and include a host system
interface port. Versions of the product are available
which support the direct connection to POS terminal I/O
Ports, integrated bar coded document reading, numerous
keyboard wedge interfaces, hand held scanner decoding,
integrated magnetic stripe reader, and auxiliary RS-232
I/O ports. All ST8300 products contain FLASH memory which
allows for easy firmware upgrades in the field without
the need to disassemble the product.
The ST8300 products provide multiple
options in meeting the data capture needs of retail and financial
transaction systems. The ST8300 may be ordered with options which
provide an integrated triple track mag stripe reader, a bar code
scanner port, and two RS-232 ports for future peripherals, such
as PIN Pads or a Signature Capture Pad. The ST8300 is compatible
with hundreds of POS and teller systems through the built in
interface/wedge controller. The ST8300 typically operates from +5
volt or +12 volt power from the host device and does not require
external power pack or connector blocks.
- Applications
- The SCANTEAM 8300 provides a wide
range of data capture capability for retail POS and
financial transaction systems. The ST8300 can adapt to a
variety of applications, giving retail / financial
transaction systems integrators the ability to reduce
fraud, increase clerk / teller efficiency, as well as
further enhance customer service.
In one small footprint, the ST8300 provides
check reading, bar code scanning, mag stripe reading, and two
RS-232 ports for additional peripherals, all sharing a single
host interface port.
- Features and
Benefits
- Compact Size
- Fits neatly into all retail and
financial transaction installations.
-
- Direct Connect Interfaces
- Connects to IBM 468X/469X, NCR OCIA,
Fujitsu OCR and Serial RS-232 devices without the need
for an external interface controller. Multiple interfaces
included in every ST8300 product.
-
- Integrated Interface Wedge
Controller
- Compatibility with hundreds of PC,
POS, and teller systems through keyboard wedge interface.
-
- Check Handling and Transport
- Motorized paper transport for quick,
easy check handling, and a high first pass good read
rate.
-
- Integrated Triple Track Mag
Stripe Decoder
- Attachment of the optional integrated
MSR allows for Track 1, 2, and 3 data capture with output
data formatting capability within the compact ST8300
enclosure.
-
- Flash Memory-Based Firmware
- Easy and fast firmware modifications.
Allows for field upgrade of ST8300 program memory for
future enhancements without a chip change. Supports host
down line load of program memory and parameters.
-
- RS-232 Ports
- The one standard, and second optional
RS-232 ports allow for additional peripherals, such as
PIN Pad and Signature Capture Pad.
-
- Wide Range Input Power
- Operates from either a regulated +5VDC
power source, or a regulated or unregulated +7 to +13 VDC
power source. For many installations, an external power
pack is not required.
-
- Laser/CCD/Wand Scanner Port
- The optional bar code scanner port
provides Welch Allyn's high performance bar code decoding
feature in the same compact ST8300 enclosure.
-
- E13-B and CMC-7 MICR Font
Auto-Discrimination
- The ST8300 can read documents encoded
with either E-13B or CMC-7 fonts. This feature is useful
for installations near international borders where
financial documents may be encoded in either font.
- Copyright
©1997 - 2003 Data Identification Systems All Rights
Reserved
